Answers are grounded in this paper and cite their sources.
Investigates how changing laser parameters affects wear performance in Ti-6Al-4V, suggesting optimal settings improve durability.
Ti-6Al-4V has been widely used in the medical and dental fields due to its good biomechanical compatibility. Selective Laser Melting (SLM), an advanced metal powder-bed additive manufacturing method, offers versatility for tailoring part properties. However, further investigation is needed into the links between process parameters, volumetric energy density (VED), and resulting tribological performance. The present study focuses on the influence of varying VED levels on the porosity, surface finish, density, and wear behavior of Ti-6Al-4V. Five sets of samples were prepared at various VEDs. A higher VED results in densification, microhardness, and wear resistance, whereas a lower VED leads to increased porosity and roughness. The measured friction coefficient ranged from 0.266 to 0.63, and SEM observations identified smoother worn tracks in samples prepared under optimized conditions. These acid-etched results provide further, more direct evidence that VED must be closely controlled in SLM to enhance the durability and tribological properties of Ti-6Al-4V parts, thereby diminishing service life and expenditure in biomedical and industrial applications.
No takes yet. Share an insight, caveat, or question.
Dakhil et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: