Answers are grounded in this paper and cite their sources.
This research shows improved hole mobility in p-type tellurium oxide films, hinting at advancements for 3D transistors.
Amorphous n-type metal oxides, such as In₂O₃ and Indium Gallium Zinc Oxide (IGZO), have shown promise as back-end-of-line (BEOL) compatible transistors, potentially offering a new paradigm for monolithic 3D stacking. However, a high-performance p-type counterpart remains a critical bottleneck. Tellurium suboxide (TeOx) has recently been shown to be a promising p-type semiconductor for BEOL applications. Yet, it remains to be seen if sub-10 nm TeOx films, needed for practical device applications, can be achieved with acceptable hole mobilities. Here, we report ultrathin TeOx transistors fabricated via cryogenic thermal evaporation at a substrate temperature of -80 °C. This low-temperature process suppresses crystallization and surface diffusion, yielding ultrasmooth films with root-mean-square roughness as low as 4 Å. The back-gated TeOx transistors achieve an on/off current ratio of 10⁵ and a field-effect mobility of 2.8 cm² V⁻¹ s⁻¹ at a channel thickness of 5.5 nm, retaining p-type switching behavior down to 2.4 nm. Selenium alloying further enhances the on/off current ratio by an order of magnitude while enabling bandgap tuning without compromising mobility.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: