Answers are grounded in this paper and cite their sources.
Establishes a thermochemical coating method improving magnetic properties by controlling copper diffusion in NdFeB magnets, suggesting a reliable engineering process.
The performance of NdFeB permanent magnets is governed by the chemistry and continuity of their grain boundary phases, yet conventional copper modification often suffers from uncontrolled segregation that degrades coercivity. This study establishes a thermochemical coating strategy that enables precise regulation of copper surface diffusion through a combination of powder pretreatment and temperature-controlled heat processing. Vacuum pretreatment of commercially obtained copper citrate powder enhances its reactivity and produces a twofold increase in diffusion depth relative to untreated powder, as verified by glow discharge spectroscopy. Systematic temperature optimization further reveals that treatment at 600 ∘ C generates the most uniform and effective Cu penetration, driven by liquid-phase-assisted transport above the Nd-Cu eutectic threshold. This optimized diffusion pathway forms a continuous Cu-enriched boundary layer while preventing excessive segregation. Magnetic measurements confirm that the intrinsic magnetic performance, including coercivity (iHc) and maximum energy product ((BH) max ), is retained after diffusion, demonstrating that microstructural refinement is achieved without compromising the primary magnetic phase. The findings provide a reproducible and scalable pathway for grain boundary engineering in NdFeB magnets and establish an experimentally validated framework for coupling surface diffusion control with magnetic property stabilization.
No takes yet. Share an insight, caveat, or question.
Lo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: