Answers are grounded in this paper and cite their sources.
Demonstrates improved magnetic properties in HDDR NdFeB powders via alloy diffusion, indicating potential for enhanced performance in magnets.
In this paper, the magnetic properties of HDDR NdFeB powders were improved by the grain boundary diffusion of Cu28Ce72 alloy. The influence and mechanism of Cu28Ce72 alloy and heating process on the coercivity (Hcj), remanence (Br), and maximum magnetic energy product (BHmax) of magnetic powders were investigated. The grain boundary diffusion of Cu28Ce72 alloy can effectively improve the Hcj, Br and BHmax of bonded magnets, exhibiting a trend of first increasing and then decreasing with the increase in diffusion temperature and Cu28Ce72 addition, and the maximum values of 927 kA/m, 0.625 T and 61 kJ/m3 are obtained at the Cu28Ce72 content of 5.0 wt% and the heating temperature of 380 °C. The demagnetization coupling effect is increased by a continuous grain boundary phase formed by the diffusion of Ce and Cu elements into the grain boundaries, and thus the coercivity of magnetic powder is improved. During the diffusion process, Ce element diffuses along the grain boundaries to repair the defective areas around the grains and form a Ce2Fe14B phase, which improves the Hcj and Br of magnetic powders; on the other hand, Ce element diffuses into Nd2Fe14B grains to replace the Nd crystal sites, reducing the Hcj and Br of magnet; therefore, the Hcj and Br of HDDR NdFeB powders are comprehensively affected by these two aspects.
No takes yet. Share an insight, caveat, or question.
Ma et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: