Answers are grounded in this paper and cite their sources.
This work investigates CO2 capture performance of hydrotalcite-derived sorbents, suggesting their potential use in hydrogen production.
This work investigated hydrotalcite-derived sorbents for CO2 capture at 350 °C, 10 or 14 bar, and 38.5 vol% CO2 in wet or dry gas flow under dynamic Pressure Swing Adsorption (PSA) in a packed-bed laboratory reactor. The chosen conditions enabled a preliminary assessment of the suitability of hydrotalcite-derived sorbents for Sorption-Enhanced-Water-Gas-Shift (SEWGS), a promising process for producing pure hydrogen from syngas. Two starting sorbents were considered: derived from commercial hydrotalcite, and from hydrotalcite synthesized by low-supersaturation. Both sorbents were doped with 20 wt% K2CO3. In addition, a hydrotalcite bifunctional catalyst-sorbent for SEWGS was studied. K2CO3-doping and higher pressure significantly improved the CO2-sorption capacity; the highest value (1.51 mmolCO2∙g−1) was measured under wet conditions at 14 bar. The bifunctional material showed good, stable CO2 sorption capacity (1.39 mmolCO2∙gsolid−1 on average out of five PSA cycles under wet conditions at 14 bar). Materials derived from commercial hydrotalcite doped with K2CO3 showed promising performances for future industrial SEWGS applications.
No takes yet. Share an insight, caveat, or question.
Malsegna et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: