Answers are grounded in this paper and cite their sources.
Investigation demonstrates optimized conditions enhance gas separation performance of silicalite-1 membranes.
The rapid synthesis of high-performance silicalite-1 membranes was systematically investigated by examining the effects of seed size, solution volume, and reactor configuration on membrane growth, microstructure, and gas separation performance. Silicalite-1 seeds (~100 nm and ~1 µm) were dip-coated onto capillary α-alumina supports, followed by secondary growth under controlled conditions. Small seeds (~100 nm) produced high nucleation density, uniform intergrowth, and defect-free membranes, yielding consistently high ideal separation factor for H2/SF6 (181–295) and low SF6 permeance (~10−9 mol m−2 s−1 Pa−1) after only 45 min of synthesis. In contrast, larger seeds (~1 µm) enabled faster growth but resulted in less uniform layers with inferior selectivity. Furthermore, a novel reactor design with enhanced heat transfer enabled the rapid silicalite-1 membrane synthesis on conventional large-diameter tubular supports, producing well-intergrown and uniform membranes with high H2 permeance (4.7 × 10−6 mol m−2 s−1 Pa−1) and high ideal separation factors of up to 349 for H2/SF6 and 223 for N2/SF6. Overall, this study demonstrates that optimization of seed properties, synthesis parameters, and reactor design enables rapid and scalable fabrication of silicalite-1 membranes with robust molecular sieving performance, highlighting their strong potential for SF6 purification applications.
No takes yet. Share an insight, caveat, or question.
Jamal et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: