Answers are grounded in this paper and cite their sources.
Experimental work shows improved wear resistance in nickel-based coatings with higher Mo content, suggesting enhanced tribological performance.
To enhance the wear resistance of IN718 and mitigate damage to the tribopair, Mo‐dispersed coatings were fabricated via laser cladding. These coatings adaptively form lubricating phases through high‐temperature friction‐induced reactions. Results showed that with 20–30 wt% Mo, the coatings developed a discrete Mo distribution, metallurgically bonded and encapsulated by Mo 2 N. As Mo content increased, both the density of the dispersed Mo and the coating hardness increased, while the fracture strength first increased and then decreased, accompanied by a transition in fracture mechanism from mixed ductile–brittle to predominantly brittle. At 700°C, NiMoO 4 was formed on the wear surface. With higher Mo content, MoO 3 coexisted with and became dominant over NiMoO 4 . Although the coefficient of friction slightly increased, it remained below 0.4. Considering both adaptive friction behavior and hardness, the 30 wt% Mo coating exhibited the lowest wear rate, achieving a 62% reduction compared to the 15 wt% coating.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: