Thermal excursions during post-weld heat treatment (PWHT) and on-site fabrication frequently compromise the integrity of Grade 92 steel. While hardness fluctuations are documented, the correlation between initial properties and long-term creep stability remains controversial. This study aims to evaluate the relationship between thermal history and subsequent creep performance. Heat treatments of T92 steel across a wide temperature range (760–1000 °C) were performed, followed by creep tests at 600 °C/130 MPa and microstructural characterization. Results reveal a non-monotonic evolution of hardness and strength, reaching a minimum at 850 °C due to martensitic lath recovery into ferrite, but nearly doubling the as-received (AR) values above 900 °C due to fresh martensite formation. Creep life drops to a minimum at 850 °C and recovers to the AR level at 950 °C. A significant “decoupling” occurs at 1000 °C, where the sample possesses the highest hardness but only exhibits one-fourth the life of the 950 °C sample. Superior performance stems from the retained M23C6 and its dynamic precipitation, which pins dislocations to form micro-lath structures. Conversely, 1000 °C facilitates full carbide dissolution, accelerating dislocation recovery. These findings emphasize precise PWHT control and demonstrate that a 950 °C rejuvenation treatment can restore over-tempered or damaged components.
He et al. (Thu,) studied this question.