Efficient energy harvesting from open-channel flows offers a sustainable solution for powering distributed sensing systems in water infrastructure. This study investigates a piezoelectric wake-excited membrane vortex-induced vibration (VIV) energy harvester through a combined numerical and mechanical approach. The device features an upstream cylindrical bluff body that generates a periodic vortex street, exciting a downstream flexible membrane equipped with surface-mounted piezoelectric patches. A one-way coupled CFD–FEM framework implemented in ANSYS was employed to assess the effects of membrane length, material stiffness, and flow conditions on hydrodynamic loading, structural deformation, and deformation power. Results show that membrane length mainly affects oscillation amplitude and force levels, whereas material stiffness has a stronger influence on membrane deformation and RMS mechanical power. Among the investigated materials, low-stiffness polyethylene yields the highest deformation power, while none of the analysed configurations reaches a full lock-in condition within the explored parameter range. Complementary mechanical analysis revealed that the stiffness of commercial piezoelectric patches significantly reduces local strain, thereby constraining the practically harvestable energy in the present baseline configuration. Spectral power density analysis identified the dominant shedding frequency and its harmonics, confirming that the flow response is governed by a coherent periodic excitation. These findings highlight key design trade-offs in wake-excited membrane harvesters and provide useful guidance for the future optimisation of self-powered hydraulic monitoring systems.
Zanetti et al. (Wed,) studied this question.