Key result
ASIC-based fetal heart rate sensing using dry and capacitive electrodes shows promise for home monitoring.
Why the study?
Prior fetal heart rate monitoring systems based on discrete components have limitations in size, power consumption, and motion artifact reduction, motivating an ASIC-based solution.
The proposed ASIC-based system demonstrates feasibility for low-power, small form-factor fetal heart rate monitoring using dry electrodes, showing promise for home monitoring applications.
Answers are grounded in this paper and cite their sources.
Enables home-based fetal heart rate monitoring with dry electrodes; extends capacitive sensing research into practical ASIC designs.
OBJECTIVE: Fetal heart rate (fHR) monitoring is a critical tool for assessing fetal well-being. A home-use solution that enables comfortable and long-term monitoring is of great interest. Dry and capacitive abdominal electrodes are considered promising techniques for this purpose. However, prior systems are typically based on discrete components, whereas application-specific integrated circuit (ASIC) designs enable a smaller form factor, lower power consumption, and the ability to integrate advanced motion artifact effect reduction (MAR) techniques. This work proposes an ASIC-based system to address the limitations of prior discrete component designs. METHODS: A 16-channel recording ASIC with an integrated MAR technique was designed in 180nm CMOS. A prototype was developed using this IC, together with a wearable garment and an exemplary fHR extraction algorithm. The IC was electrically characterized, and the prototype was validated through both in-vitro and in-vivo experiments. RESULTS: The chip achieves the required performance and MAR through a 10x extended dynamic range (>1 V) and saturation prevention, while occupying only 12.5 mm2 and consuming 450 μW. Validation with four pregnant volunteers using dry electrodes shows that within each 24-minute recording, at least 3 minutes of data provided sufficient quality for the detection of fetal QRS-peaks and fHR. CONCLUSION: The IC-based solution offers low power, small form factor, MAR, and the ability to obtain fHR in real use cases. SIGNIFICANCE: The proposed design is the first IC-based solution for dry and potentially capacitive fHR monitoring, which proves to be a promising candidate for home monitoring applications.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied Pregnancy (fetal heart rate monitoring) (n=4). ASIC-based fetal heart rate sensing system using dry electrodes was evaluated on Detection of fetal QRS-peaks and fHR. An ASIC-based fetal heart rate sensing system using dry electrodes provided at least 3 minutes of sufficient quality data for fetal QRS-peak detection within each 24-minute recording.
Synapse has enriched 10 related papers. Consider them for comparative context: