With the rapidly growing global demand for clean energy, offshore wind power has become an important renewable energy source. To clarify how the principal dimensions affect the performance of a 15 MW-class floating wind turbine platform in 100 m water depth, this paper proposes a steel-concrete hybrid semi-submersible platform and systematically performs a parametric sensitivity analysis. The platform adopts a three-column configuration with heave tanks. The upper columns and cross braces are made of steel, while the lower hexagonal columns, pontoons, and heave tanks are constructed from concrete, significantly reducing steel consumption while satisfying structural and stability requirements. Focusing on three key design variables—draft, column spacing, and column diameter—this study establishes a unified normalized sensitivity analysis framework. It quantitatively evaluates their influence on platform mass, intact stability, natural periods, and fully coupled dynamic responses (including surge, heave, pitch motions, and mooring line tensions) under both operational and extreme conditions. The results reveal distinct roles of the principal dimensions in governing the platform dynamics: column spacing is the most sensitive parameter for tuning pitch response, restoring stiffness, and stability; increasing draft effectively suppresses heave and pitch responses but has only a limited effect on low-frequency surge motions; and column diameter strongly affects the natural periods of heave and pitch. Notably, dynamic responses exhibit significant nonlinear characteristics with variations in column diameter. When the diameter exceeds 110–120% of the baseline value, the peak pitch response under extreme sea states shows a deteriorating inflection point, accompanied by an accelerated surge in peak mooring loads. This indicates that excessive increases in column diameter may cause wave excitation forces to become dominant, thereby compromising the overall dynamic safety of the system. This paper identifies the governing geometric parameters for different motion modes and their control boundaries, providing a quantifiable and generalizable basis for the multi-objective collaborative design and cost reduction optimization of 15 MW steel-concrete hybrid semi-submersible floating wind turbine platforms.
Hu et al. (Thu,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: