Answers are grounded in this paper and cite their sources.
This study investigates the influence of heave-plate geometry on the dynamic responses of a 16-MW semi-submersible floating offshore wind turbine under a constant-displacement constraint. An OpenFAST model was evaluated against basin-test measurements. Two modified configurations, HP-1.25 and HP-2.50, were developed by increasing the heave-plate radius while reducing its thickness to maintain constant displacement. Free-decay simulations and time-domain analyses under three normal operating wind–wave conditions were conducted to assess platform motions, tower-base bending moments, and mooring-line tensions. Compared with the baseline configuration, HP-2.50 reduced the standard deviation of platform heave by 37.5%, 28.6%, and 28.6% under OP1, OP2, and OP3, respectively. It also reduced tension fluctuations in the six highly loaded mooring lines across all three conditions. The maximum system mooring tension decreased by 13.6% under OP1 and 12.8% under OP2, but by only 1.2% under OP3. Tower-base bending-moment responses varied with operating conditions, with the maximum positive peak increasing by 3.9% under OP1 and approximately 0.3% under OP3. Overall, HP-2.50 exhibited more favorable dynamic-response characteristics, particularly in platform-heave and mooring-tension fluctuation control. However, improvements were not uniform across all response measures, highlighting the need for a multi-indicator approach to heave-plate design.
No takes yet. Share an insight, caveat, or question.
Dai et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: