Answers are grounded in this paper and cite their sources.
This paper presents the end-to-end multidisciplinary development and flight-test assessment of a Class I fixed-wing mini-unmanned aerial vehicle (UAV) designed for surveillance and reconnaissance missions. The development process progresses from mission and system-level requirements through conceptual, preliminary, and detailed design, followed by prototype fabrication and experimental flight testing. Conceptual design establishes aircraft mass, wing and power loading, aerodynamic configuration, wing geometry, airfoil selection, mass distribution, and initial stability characteristics. The preliminary and detailed stages progressively increase analysis fidelity through assessments of aerodynamics, structures, aeroelasticity, propulsion, stability and control, performance, and thermal management. High-fidelity Computational Fluid Dynamics (CFD) analyses are performed in ANSYS Fluent for aerodynamic characterization and load prediction, while the finite-element (FE) structural and aeroelastic analyses are performed in MSC Patran/Nastran to assess strength, stiffness, buckling, and static and dynamic aeroelastic behavior. The aircraft configuration incorporates a V-tail, electric pusher propulsion, composite structural components, integrated control surfaces, wingtip devices, and dedicated cooling arrangements. A representative 3D-printed flight-test article retaining the principal aerodynamic architecture was subsequently evaluated in climb, straight-and-level flight, sustained turns, and low-speed operation. The vehicle exhibited stable and predictable handling throughout the tested envelope. Flight-derived aerodynamic trends were compared with the detailed-design CFD database, showing drag-coefficient differences below approximately 3% in straight-and-level flight and 1.5% during climb, with larger discrepancies reaching approximately 16% in sustained turns. These results provide a useful consistency assessment of the numerical predictions, although the use of GPS-derived ground speed and propulsion-model-based thrust limits their interpretation as a direct aerodynamic validation. Overall, this study demonstrates a traceable progressive-fidelity methodology for advancing a mini-UAV from requirements and conceptual sizing to multidisciplinary verification and prototype-level flight assessment.
No takes yet. Share an insight, caveat, or question.
Nikolaou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: