Answers are grounded in this paper and cite their sources.
Aerosol jet printing (AJP) shows promise for printable electronics and additive manufacturing as it is capable of printing conformally on nearly any substrate due to its direct write patterning, noncontact printing process, and compatibility with a wide range of printing materials. However, nearly all printed inks require some form of postprocessing sintering to achieve acceptable properties, such as electrical conductivity. In this article, a design of experiment (DOE) using Van der Pauw printed pads is presented, which can be applied to characterize any conductive ink. We focus on a new silver nanoparticle ink from NovaCentrix (JS-A426) that was developed specifically for aerosol jet printing and study its electrical conductivity under a variety of sintering time and temperature conditions. From these results, a linear regression model is developed that accurately predicts the experimentally measured electrical conductivity of the printed ink. This DOE characterization process and resulting predictive model are especially useful for applications requiring limited thermal budgets, such as flexible electronics. SEM images are also used to analyze how the silver particles coalesce and densify due to thermal diffusion. Finally, the above results are used to design and fabricate an in situ miniature strain gauge sensor using the NovaCentrix JS-A426 silver nanoparticle ink on a thin flexible substrate. After printing and sintering, the miniature custom strain gauge had a nominal resistance of <tex-math notation="LaTeX">355~Ω </tex-math> and a gauge factor of 1.74. These values are similar to commercial metal foil strain gauges and demonstrate that the aerosol jet printing is a viable manufacturing process for the production of custom miniature in situ strain gauges. Advantages of this methodology include quick prototyping, custom digital design, conformal printing on essentially any surface, elimination of any adhesive layer, and manufacturing in less than a minute. This work is also the first to characterize the JS-A426 silver nanoparticle ink thermal curing process and demonstrate its use as a viable sensing element using direct write aerosol jet printing.
No takes yet. Share an insight, caveat, or question.
Ratnayake et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: