Answers are grounded in this paper and cite their sources.
This article presents a new fractional- <tex-math notation="LaTeX">N </tex-math> frequency synthesizer for 5G <tex-math notation="LaTeX">⁺ </tex-math> communication systems. Unlike a classical RF synthesizer, the proposed synthesizer frequency multiplication is performed by an intermediate frequency (IF) voltage-controlled oscillator (VCO) and a programmable- <tex-math notation="LaTeX">K </tex-math> frequency multiplier (FM). Therefore, an RFVCO gain, <tex-math notation="LaTeX">Kvco </tex-math> , is replaced by <tex-math notation="LaTeX">Kifvco × K </tex-math> , where <tex-math notation="LaTeX">Kifvco </tex-math> is the IFVCO gain. Consequent <tex-math notation="LaTeX">Kifvco </tex-math> can be 95 times less than <tex-math notation="LaTeX">Kvco </tex-math> to cover the 3.2–5.6-GHz frequency band. The <tex-math notation="LaTeX">Kifvco </tex-math> reduction will provide 21.6-dB phase noise (PN) improvement according to <tex-math notation="LaTeX">20log (Kvco ω if / Kifvco ω rf) </tex-math> . On the contrary, the proposed synthesizer has the same frequency divider (FD) in the feedback path as that of the classical fractional- <tex-math notation="LaTeX">N </tex-math> synthesizer. The synthesizer minimum channel resolution can be possibly 195.3125 kHz with a 200-MHz reference clock and 10-bit mash 1-1- <tex-math notation="LaTeX">1 Δ Σ </tex-math> encoder. A bipolar junction transistor (BJT)-based charge pump (CP) is integrated to provide low in-band PN. The presented synthesizer is fabricated on a 130-nm SiGe process, and its core die size is 1 mm2. The total power consumption is 15 mW, as well as the channel resolution is 390.625 kHz to guarantee less than −75 dBc fractional spur. The integrated rms jitter for the 1 kHz–100-MHz offset frequency band is measured as 77 fs.
No takes yet. Share an insight, caveat, or question.
Hong et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: