Answers are grounded in this paper and cite their sources.
Currently, there is high demand for the development of a highly mass-producible technology for manufacturing moth-eye-structured films with an antireflection function. Conventional moth-eye-structured films have been produced by roll-to-roll (RTR) ultraviolet nanoimprint lithography (UV-NIL) using porous alumina, but the process of manufacturing the roll mold with aluminum is both complicated and time-consuming. To solve this problem, we proposed a sputtering process for forming a thin film of glassy carbon on a roll substrate and fabricated a moth-eye structure through the irradiation of oxygen plasma. A glassy carbon (GC) moth-eye-structure roll mold with a uniform reflectance of less than 0.1% over a length of 1560 mm was fabricated following this method. In addition, a superhydrophobic moth-eye-structured film was produced by RTR UV-NIL using the proposed roll mold, which exhibited a reflectance of 0.1%. In this study, a moth-eye-structure roll using porous alumina was compared with a film transferred from it. The GC moth-eye-structure roll mold was found to be superior in terms of antireflection, water repellency, and productivity. When the proposed large-area GC moth-eye-structured film was applied to window glass, significant anti-reflection and water-repellent functionalities were obtained.
No takes yet. Share an insight, caveat, or question.
Kato et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: