Answers are grounded in this paper and cite their sources.
In this study, a method is proposed for the rapid fabrication of a hexagonal compound eye microlens array (HCE-MLA) using maskless lithography technique based on digital micromirror device (DMD), in which a hexahedron array is lithographed, and subsequently, a microlens structure is lithographed layer by layer upon the hexahedron. Owing to the high filling rate of the hexagon and the aspheric surface of the paraboloid profile of the microlens, after the distribution of the required exposure dose of HCE-MLA was calculated based on dose modulation, a series of circular pattern with different radius could be obtained by equal-arc-mean slicing strategy that can adapt to the variable curvature of the target contour and improve its reconstruction precision. Then, after a hexagonal photoresist island was fabricated on the substrate, and the dose accumulated over multiple exposures, the required exposure dose profiles were reconstructed on the hexagonal photoresist island. Finally, a high-quality HCE-MLA with a smooth surface was fabricated via thermal reflow. The fabrication of the designed HCE-MLA using this method was demonstrated in experiments. The results indicate that the actual profile of HCE-MLA shows good agreement with the design profile and that simultaneously increasing the number of the slicing layers can improve the quality of the profile. The research indicated that this method is feasible and convenient for the fabrication of high-quality HCE-MLA.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: