Answers are grounded in this paper and cite their sources.
Thermal performance of solar air heater has been found to be substantially improved by the application of artificial roughness provided on underside of absorber surface. The present investigation was taken up to study the effect of broken V-rib roughness combined with staggered ribs on heat transfer and friction in a flow through artificially roughened solar air heater duct. This work covered a range of Reynolds number (Re) 3000–17 000, relative staggered rib pitch (p′/p) 0.2–0.8, relative staggered rib size (r/e) 1–2.5, relative gap position (s′/s) 0.2–0.8 for the fixed values of relative roughness pitch (p/e) of 10, relative roughness height (e/Dh) of 0.043, relative gap size (g/e) of 1, and angle of attack (α) of 60°. Experimental data pertinent to heat transfer and friction was generated and thermohydraulic performance was determined for different sets of roughness and flow parameters.
No takes yet. Share an insight, caveat, or question.
Patil et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: