This is the authors' abstract. We don't add key points for this paper.
Cerium oxide thin films were deposited on fused silica using atomic layer deposition (ALD). The novel Ce precursor, Ce(iPrCp)2(N-iPr-amd) [bis-isopropylcyclopentadienyl-di-isopropylacetamidinate-cerium] is a room-temperature liquid with good thermal stability and evaporates cleanly. Water vapor was used as the oxygen source. The growth characteristics and film properties of ALD CeO2 were investigated. A relatively broad ALD window of 165–285 °C resulted in a constant growth rate of 1.9 Å/cycle and good thickness uniformity. The films deposited at 240 °C were found to be polycrystalline with cubic structure without a preferential direction in as-deposited condition. However, films grown at 335 °C slightly favored a (200) preferred orientation. XPS analysis showed that films are free from contamination, and the Ce:O stoichiometry analysis revealed the existence of oxygen vacancies in the films with composition CeO1.74.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Golalikhani et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: