Answers are grounded in this paper and cite their sources.
Thick [1–10 mil (25.4–254.0 μm)] OFHC copper coatings were deposited on copper, tantalum, and stainless-steel substrates maintained at temperatures (T) in the 50 °–950 °C range, at rates of from 200 to 18 000 Å/min, using primarily hollow and also post-type cathode sputtering apparatuses at argon pressures of 1 and 30 mTorr. Coating structures were examined by preparing metallographic cross sections. Surface topographies and fracture cross sections were examined by scanning electron microscopy. Crystallographic orientations were determined by x-ray diffraction. No significant deposition rate influence was found on the low-temperature structure zones reported previously [J. A. Thornton, J. Vac. Sci. Technol. 11, 666 (1974)] or on the columnar nature of coatings formed at elevated T. Truly equiaxed grain structures were generally not observed with hollow cathodes. Annealing twins were found within the grains for T≳350 °C. Evidence of extensive recrystallization and grain growth was seen for T∠900 °C. Coatings deposited at low rates and T≳400 °C on Cu substrates exhibited epitaxial effects; those on dissimilar substrates showed evidence of agglomeration.
No takes yet. Share an insight, caveat, or question.
John A. Thornton (1975) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: