Answers are grounded in this paper and cite their sources.
The influence of C and heat treatment on the hot ductility of Nb-Ti microalloyed steels, in the temperature range 800 to 1300°C, was investigated by tensile testing at low strain rates. The C range was varied between 0.07 and 0.14 wt% (peritectic composition). The heat treatments involved direct heating to the test temperature, annealing at 1330°C and subsolidus reheating at 1480°C . The increase of the C content to 0.14 wt% slightly affects the hot ductility after the direct heating and annealing treatments. However, after subsolidus reheating, the width of the ductility trough is increased in the 0.14 wt% C steel. This effect is attributed to the coarser austenite structure inherited from this prior heat treatment.
No takes yet. Share an insight, caveat, or question.
Guillet et al. (1993) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: