Answers are grounded in this paper and cite their sources.
This research demonstrates a dip-coating method enhancing power generation in flexible thermoelectric generators, indicating a promising advancement for energy devices.
Single‐walled carbon nanotube (SWCNT) films hold great promise for advancing flexible thermoelectric generators. However, achieving a high power factor for the films as well as device output power remains challenging. Herein, a scalable dip‐coating strategy to fabricate vacuum‐filtered SWCNT films conformally coated with poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is reported. This approach enhances interfacial charge transport and enables precise control over the SWCNT film coating. By optimizing the coating duration, the SWCNT/PEDOT:PSS composite films achieved a power factor of ∼340 µW/mK 2 near room temperature. These values exceed those of pristine SWCNT films by ∼30% and outperform most previously reported films prepared via direct mixing or drop‐casting. To demonstrate practical applicability, five pairs of SWCNT/PEDOT:PSS composite films were integrated onto an Ecoflex substrate to fabricate a flexible thermoelectric generator. The device provided a power density of ∼0.32 µW/cm 2 at a 30 K temperature gradient with stable performance over repeated cycles. The combination of scalability, low‐cost processing, and improved thermoelectric performance highlights dip‐coating as a compelling and versatile route for the development of next‐generation SWCNT‐based flexible thermoelectric generators.
No takes yet. Share an insight, caveat, or question.
Hasan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: