Near-Wellbore Hydraulic Fracture Characterization by In-Well Fiber Optic LF-DAS and DTS

In-well hydraulic fracture monitoring based on joint low-frequency distributed acoustic sensing (LF-DAS)/distributed temperature sensing (DTS) enables the acquisition of optical fiber mechanical strain data, which reflect fracture propagation and rock deformation during hydraulic fracturing. This paper presents an analytical method to interpret the mechanical strain profile measured by in-well LF-DAS/DTS during the fracturing process based on strain transfer theory and the Sneddon solution for fracture propagation. The analytical method is validated by a numerical model that simulates the strain field induced by fracture propagation. The sensitivity of the fiber strain to key factors, such as fracture geometry parameters and gauge length, is analyzed. The results indicate that compressive strain in the formation adjacent to the propagating fracture remains observable from the mechanical strain profile under the low fiber lag parameter condition. The presented method is applied to analyze the mechanical strain profile measured from a fractured horizontal well. Considering the reactivation of the pre-existing fracture, the location of the fractures is identified, and the fractures’ geometric parameters are inverted. This study provides a quantitative evaluation method for fracture geometry characterization based on joint LF-DAS/DTS fracturing monitoring.