The global transition toward carbon-neutral energy solutions has established Solid Oxide Fuel Cells (SOFCs) as a key technology for next-generation power generation. This work presents a comprehensive numerical study and multi-factor statistical analysis of an anode-supported SOFC fueled by synthetic diesel. A three-dimensional computational fluid dynamics model, validated against experimental data, was integrated with a Taguchi L27 orthogonal array to systematically evaluate the influence of six key parameters: temperature, fuel mass flow rate, operating pressure, current load, flow channel configuration, and methane molar fraction. Statistical analysis through the signal-to-noise ratio and analysis of variance identified the operating current as the most significant factor affecting cell voltage, followed by the fuel mass flow rate and temperature. The experiments showed that the highest levels of all factors (except for the current, which had the lowest level) maximize electrochemical performance while maintaining a steam-to-carbon ratio (S/C) within a range of 0.83 to 0.92, calculated based on total carbon content, ensuring sufficient humidification for internal reforming across all tested fuel compositions. Furthermore, a multiple linear regression model was developed as a computationally efficient surrogate, demonstrating exceptional predictive accuracy with an R2 of 0.9954 and a mean relative error of 1.76% across independent validation cases. These results provide a robust methodology for rapid design and sensitivity analysis of internal-reforming SOFCs, offering a precise tool for optimizing fuel utilization in high-temperature electrochemical systems.
Estrada-Herrera et al. (Wed,) studied this question.