This is the authors' abstract. We don't add key points for this paper.
A common problem encountered in state-of-the-art load-sensing (LS) systems is that of throttling losses due to load imbalance among hydraulic functions. Several architectures exist which resolve this challenge using multiple pumps — or accumulator-stabilized pressure rails — with dynamic switching of connections to minimize throttling losses. These solutions can be expensive and complex to implement, and can thus be unsuitable in cases when only one function causes the load imbalance. This work presents a solution based on a hydraulic transformer used to isolate one high-load, low-power actuator from the rest of the system while maintaining single pump LS functionality with lower throttling losses. This is accomplished by connecting a hydraulic transformer to an existing rotary function to boost the supplied pressure of the system to the level required by the high-load user. This boosted pressure is stabilized using an accumulator. This allows the main LS pumps in the system to operate at a pressure level set by the other functions. The reference case considered is an Agricultural Tractor / Planter with four functions at similar load pressures and one requiring much higher pressure and much lower flow, which negatively affect energy efficiency. The paper describes the sizing of the proposed architecture using commercially available components, estimates its saving potential, and validates this potential with field tests. Experimental tests demonstrated a reduction in pump power of 37% over the baseline system for the most common operating conditions, demonstrating its viability as a method for reducing throttling losses caused by a load imbalance in the planter actuators.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Lengacher et al. (2023) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: