Answers are grounded in this paper and cite their sources.
Uncontrolled flow through different permeability zones in oil reservoirs remains a huge challenge during water flooding, which can significantly limit microbial-enhanced oil recovery (MEOR)) efficiency. The aim of the present work was to use polymer-based plugging to assist MEOR through laboratory simulation and field tests. An indigenous strain HB3 was evaluated under field-relevant conditions. A polymeric HPAM/Cr(III) plugging system was optimized which was also compatible with the microorganism. Laboratory-based simulation demonstrated the selective plugging with HPAM/Cr(III) resulting in enhanced oil recovery more significantly in the low-permeability core, increasing from 12.8% to 47.5%, compared to that in the high-permeability one, from 47.1% to 63.2%. A subsequent microbial injection enhanced the oil recovery further, also with more effective enhancement in the low-permeability core, increasing from 49.5% to 70.0% while from 67.5% to 78.0% in the high-permeability one. The field tests involving two water injection and nine oil production wells confirmed the improvement of deep profile control by polymer-based plugging, resulting in a more uniform distribution of water absorption. With subsequent microbial injection, oil recovery was significantly enhanced, achieving an ultimate recovery of 57.6% and a cumulative oil increment of 3486 t in nine wells over the 7 month field tests. It was demonstrated that the application of polymer-based plugging significantly improved MEOR efficiency, providing a new route for EOR, especially for heterogeneous reservoirs.
No takes yet. Share an insight, caveat, or question.
Ke et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: