Remarks about protein structure precision

Full-matrix least squares is taken as the basis for an examination of protein structure precision. A two-atom protein model is used to compare the precisions of unrestrained and restrained refinements. In this model, restrained refinement determines a bond length which is the weighted mean of the unrestrained diffraction-only length and the geometric dictionary length. Data of 0.94 A resolution for the 237-residue protein concanavalin A are used in unrestrained and restrained full-matrix inversions to provide standard uncertainties sigma(r) for positions and sigma(l) for bond lengths. sigma(r) is as small as 0.01 A for atoms with low Debye B values but increases strongly with B. The results emphasize the distinction between unrestrained and restrained refinements and between sigma(r) and sigma(l). Other full-matrix inversions are reported. Such inversions require massive calculations. Several approximate methods are examined and compared critically. These include a Fourier map formula Cruickshank (1949). Acta Cryst. 2, 65-82, Luzzati plots Luzzati (1952). Acta Cryst. 5, 802-810 and a new diffraction-component precision index (DPI). The DPI estimate of sigma(r, Bavg) is given by a simple formula. It uses R or Rfree and is based on a very rough approximation to the least-squares method. Many examples show its usefulness as a precision comparator for high- and low-resolution structures. The effect of restraints as resolution varies is examined. More regular use of full-matrix inversion is urged to establish positional precision and hence the precision of non-dictionary distances in both high- and low-resolution structures. Failing this, parameter blocks for representative residues and their neighbours should be inverted to gain a general idea of sigma(r) as a function of B. The whole discussion is subject to some caveats about the effects of disordered regions in the crystal.