Answers are grounded in this paper and cite their sources.
The dependence of the interband tunneling current on AlSb barrier widths is studied in the InAs/AlSb/GaSb single-barrier diode structures. The experimental results show that the peak current density displays an exponential dependence on the barrier width. The Wentzel-Kramers-Brillouin approximation combined with the k⋅p two-band model were used in analyzing the energy level in the AlSb barrier through which the peak tunneling currents occur. The energy level thus obtained (0.48±0.10 eV above the valence band edge of the AlSb) agrees with the valence-band offset (0.40±0.15 eV) between the AlSb and the GaSb obtained by x-ray photoemission measurement reported by Gualtieri et al. [Appl. Phys. Lett. 49, 1037 (1986)]. By adjusting the barrier width properly, we obtained a high peak current density of 24 kA/cm2 (with a peak-to-valley ratio of 1.4) and a high peak-to-valley ratio of 4.5 (with a peak current density of 3.5 kA/cm2) at room temperature. In addition, the peak-current voltages for different AlSb barrier widths were calculated and compared with the measured results.
No takes yet. Share an insight, caveat, or question.
Chen et al. (1990) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: