Answers are grounded in this paper and cite their sources.
• Metal material jetting (MMJ) enables refined SS316L microstructures. • MMJ 316L shows up to 16× improvement in fatigue life over binder jetting. • Grain refinement enhances crack growth resistance. • Fatigue limit predicted via hardness–defect model within ∼5 % error. • MMJ offers high fatigue resistance for structural materials applications. This study explores the fatigue performance of novel metal material jetting (MMJ), a process that uses sub-micron powders to induce significantly refined microstructures compared with other sinter-based additive manufacturing (AM) technologies such as metal binder jetting (MBJ). Stainless steel 316L (SS316L) samples fabricated via MMJ were subjected to fully reversed uniaxial cyclic loading to generate a stress-life (S/N) curve, which was compared to literature data for MBJ SS316L. The fatigue performance of MMJ SS316L was markedly superior to MBJ, with as much as 16× improvement in the number of cycles to failure in the low cycle fatigue regime and 14× in the high cycle fatigue regime. This enhancement was attributed to the inherent smaller grains, leading to a high density of high-angle grain boundaries and annealing twins that improved resistance to crack initiation and propagation. A mechanics-based model incorporating hardness and defect size was used to estimate the fatigue limit, yielding a ∼5 % error compared to experimental values. These results underscore the influence of finer microstructural features and defect distribution on fatigue performance in sinter-based AM and highlight MMJ’s potential for structural applications requiring high fatigue resistance
No takes yet. Share an insight, caveat, or question.
Ibrahim et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: