Key points are not available for this paper at this time.
A carbon nanotube polymer material was used to form a piezoresistive strain sensor for structural health monitoring applications. The polymer improves the interfacial bonding between the nanotubes. Previous single walled carbon nanotube buckypaper sensors produced distorted strain measurements because the van der Waals attraction force allowed axial slipping of the smooth surfaces of the nanotubes. The polymer sensor uses larger multi-walled carbon nanotubes which improve the strain transfer, repeatability and linearity of the sensor. An electrical model of the nanotube strain sensor was derived based on electrochemical impedance spectroscopy and strain testing. The model is useful for designing nanotube sensor systems. A biomimetic artificial neuron was developed by extending the length of the sensor. The neuron is a long continuous strain sensor that has a low cost, is simple to install and is lightweight. The neuron has a low bandwidth and adequate strain sensitivity. The neuron sensor is particularly useful for detecting large strains and cracking, and can reduce the number of channels of data acquisition needed for the health monitoring of large structures.
Kang et al. (2006) studied this question.