Key result
The transit time group delay (TT-GD) method was more robust to temporal resolution and waveform type than traditional methods, with intraobserver and interobserver variabilities of 3.4% and 3.7%.
Why the study?
Does the TT-GD method improve the robustness and reproducibility of pulse wave transit time estimation from cardiovascular magnetic resonance flow curves compared to traditional time-domain methods?
Observational (n=30)
Does the TT-GD method improve the robustness and reproducibility of pulse wave transit time estimation from cardiovascular magnetic resonance flow curves compared to traditional time-domain methods?
Answers are grounded in this paper and cite their sources.
The TT-GD method offers a more robust and reproducible approach for estimating pulse wave transit time from cardiovascular magnetic resonance flow curves compared to traditional time-domain methods.
PURPOSE: To evaluate the efficiency of a novel transit time (Δt) estimation method from cardiovascular magnetic resonance flow curves. MATERIALS AND METHODS: Flow curves were estimated from phase contrast images of 30 patients. Our method (TT-GD: transit time group delay) operates in the frequency domain and models the ascending aortic waveform as an input passing through a discrete-component "filter," producing the observed descending aortic waveform. The GD of the filter represents the average time delay (Δt) across individual frequency bands of the input. This method was compared with two previously described time-domain methods: TT-point using the half-maximum of the curves and TT-wave using cross-correlation. High temporal resolution flow images were studied at multiple downsampling rates to study the impact of differences in temporal resolution. RESULTS: Mean Δts obtained with the three methods were comparable. The TT-GD method was the most robust to reduced temporal resolution. While the TT-GD and the TT-wave produced comparable results for velocity and flow waveforms, the TT-point resulted in significant shorter Δts when calculated from velocity waveforms (difference: 1.8±2.7 msec; coefficient of variability: 8.7%). The TT-GD method was the most reproducible, with an intraobserver variability of 3.4% and an interobserver variability of 3.7%. CONCLUSION: Compared to the traditional TT-point and TT-wave methods, the TT-GD approach was more robust to the choice of temporal resolution, waveform type, and observer.
No takes yet. Share an insight, caveat, or question.
Meloni et al. (2013) reported an observational. Transit time group delay (TT-GD) method vs. TT-point and TT-wave methods was evaluated on Transit time estimation robustness and reproducibility. The transit time group delay (TT-GD) method was more robust to temporal resolution and waveform type than traditional methods, with intraobserver and interobserver variabilities of 3.4% and 3.7%.
Synapse has enriched 10 related papers. Consider them for comparative context: