Answers are grounded in this paper and cite their sources.
An electret power generator is developed using a new electret made of a charged parylene HT R thin-film polymer. Here, parylene HT R is a room-temperature chemical-vapor-deposited thin-film polymer that is MEMS and CMOS compatible. With corona charge implantation, the surface charge density of parylene HT R is measured as high as 3.69 mC m -2 . Moreover, it is found that, with annealing at 400 C for 1 h before charge implantation, both the long-term stability and the high-temperature reliability of the electret are improved. For the generator, a new design of the stator/rotor is also developed. The new micro electret generator does not require any sophisticated gap-controlling structure such as tethers. With the conformal coating capability of parylene HT R , it is also feasible to have the electret on the rotors, which is made of either a piece of metal or an insulator. The maximum power output, 17.98 W, is obtained at 50 Hz with an external load of 80 M . For low frequencies, the generator can harvest 7.7 W at 10 Hz and 8.23 W at 20 Hz.
No takes yet. Share an insight, caveat, or question.
Lo et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: