Answers are grounded in this paper and cite their sources.
Testing and validating modern hardware such as some subsystems in modern vehicles is a little challenging especially before assembling them into the final product. To achieve a valid real-time test, the tested hardware or unit must be placed into its real-time environment which is not possible in some cases. Recently, and with the presence of advanced simulation software applications, the hardware environment could be simulated easily to fulfill the real-time test properly. Simulating an environment in one loop with real physical hardware knowing as Hardware-in-the-loop is used nowadays in various development fields, medical, industrial, research, and education. Amongst the aforementioned, HIL is widely used in control systems applications. In the paper, building a framework to enable hardware in the loop (HIL) simulation with the aid of MATLAB/Simulink is discussed. Over serial communication, and inexpensive data acquisition (DAQ) peripheral has been developed using a microcontroller unit. the development of the framework is discussed to be used as a guide for building it by using any microcontroller. The resultant performance appeal to excellent real-time response with quite a small delay of about 70ms in the worst case.
No takes yet. Share an insight, caveat, or question.
Bayram et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: