Answers are grounded in this paper and cite their sources.
Randomized trial examines impact of disk edge geometry on pressure characteristics at Mach 2, suggesting new design modifications.
This study investigates the influence of disk edge geometry on the flow physics and pressure characteristics of a Multi-Row Disk Inlet Device (MRDID) operating at Mach 2 within the open cavity regime (L/D = 1). A detailed parametric analysis was conducted using 2D axisymmetric RANS simulations with the SST k-ω turbulence model and second-order MUSCL discretization, supported by supersonic wind tunnel experiments for validation. Two baseline geometries, the Flat Tip Disk (FTD) and Sharp Tip Disk (STD), were examined to understand the role of rear-wall stagnation and cavity shock interaction. Results show that FTD produces higher peak pressure ratios, compression, and drag due to a strong stagnation zone at the cavity rear wall, whereas STD reduces stagnation severity through its inclined surface. To explore passive flow control, two modified geometries-Rear Chamfered Tip Disk (RCTD) and Front Chamfered Tip Disk (FCTD)-were introduced. Rear chamfering improves wake recovery and reduces recompression shocks, while front chamfering transforms the detached bow shock into an attached oblique shock, significantly lowering peak pressure. The study establishes disk edge shaping as a critical passive design parameter for optimizing MRD inlet performance.
No takes yet. Share an insight, caveat, or question.
Sinha et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: