Key result
THERMOCOOL SMARTTOUCH SF produces the highest maximum tissue temperature of ~63°C versus comparators in porcine models.
Why the study?
Tissue temperatures during ablation with different catheters around the venoatrial junction and collateral tissues remain unclear.
Do different high-power short-duration ablation catheters and settings affect tissue temperature and lesion characteristics in a porcine model?
Do different high-power short-duration ablation catheters and settings affect tissue temperature and lesion characteristics in a porcine model?
p-value: p=0.005
Distinct tissue temperature patterns during HPSD and vHPSD ablations with different catheters affect lesion effectiveness and collateral damage, with Qmode+ showing the least deep esophageal adventitia injury.
Catheter-specific temperature differences may affect lesion safety; animal data leaves open optimal HPSD selection in humans.
Introduction High‐power short‐duration (HPSD) ablation at 50 W, guided by ablation index (AI) or lesion size index (LSI), and a 90 W/4 s very HSPD (vHPSD) setting are available for atrial fibrillation (AF) treatment. Yet, tissue temperatures during ablation with different catheters around venoatrial junction and collateral tissues remain unclear. Methods In this porcine study, we surgically implanted thermocouples on the epicardium near the superior vena cava (SVC), right pulmonary vein, and esophagus close to the inferior vena cava. We then compared tissue temperatures during 50W‐HPSD guided by AI 400 or LSI 5.0, and 90 W/4 s‐vHPSD ablation using THERMOCOOL SMARTTOUCH SF (STSF), TactiCath ablation catheter, sensor enabled (TacthCath), and QDOT MICRO (Qmode and Qmode+ settings) catheters. Results STSF produced the highest maximum tissue temperature (T max ), followed by TactiCath, and QDOT MICRO in Qmode and Qmode+ (62.7 ± 12.5°C, 58.0 ± 10.1°C, 50.0 ± 12.1°C, and 49.2 ± 8.4°C, respectively; p = .005), achieving effective transmural lesions. Time to lethal tissue temperature ≥50°C (t−T ≥ 50°C) was fastest in Qmode+, followed by TacthCath, STSF, and Qmode (4.3 ± 2.5, 6.4 ± 1.9, 7.1 ± 2.8, and 7.7 ± 3.1 s, respectively; p < .001). The catheter tip‐to‐thermocouple distance for lethal temperature (indicating lesion depth) from receiver operating characteristic curve analysis was deepest in STSF at 5.2 mm, followed by Qmode at 4.3 mm, Qmode+ at 3.1 mm, and TactiCath at 2.8 mm. Ablation at the SVC near the phrenic nerve led to sudden injury at t−T ≥ 50°C in all four settings. The esophageal adventitia injury was least deep with Qmode+ ablation (0.4 ± 0.1 vs. 0.8 ± 0.4 mm for Qmode, 0.9 ± 0.3 mm for TactiCath, and 1.1 ± 0.5 mm for STSF, respectively; p = .005), correlating with T max . Conclusion This study revealed distinct tissue temperature patterns during HSPD and vHPSD ablations with the three catheters, affecting lesion effectiveness and collateral damage based on T max and/or t−T ≥ 50°C. These findings provide key insights into the safety and efficacy of AF ablation with these four settings.
No takes yet. Share an insight, caveat, or question.
Otsuka et al. (2023) studied Atrial fibrillation. THERMOCOOL SMARTTOUCH SF, TactiCath, and QDOT MICRO catheters was evaluated on Maximum tissue temperature (T max) (p=0.005). THERMOCOOL SMARTTOUCH SF produced the highest maximum tissue temperature (62.7 ± 12.5°C) compared to TactiCath, Qmode, and Qmode+ (p=0.005) in a porcine model.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: