Fused Filament Fabrication (FFF) is a widely used additive manufacturing technology due to its versatility, low cost, and broad material compatibility. However, achieving high dimensional accuracy in FFF parts remains challenging because dimensional deviations are affected by material shrinkage, process parameters, and part geometry. This study analyses the dimensional deviations of PLA hollow cylindrical specimens manufactured by FFF, with particular attention to the different behaviour of outer and inner diameters. The methodology combines an iterative design-adjustment procedure with a neural-network-based compensation approach. First, specimens with different geometries were printed and measured to evaluate the evolution of dimensional error after successive design corrections. Then, the influence of print speed and layer thickness was analysed through the volumetric material flow rate, and the resulting data were used to train separate feedforward neural networks for the outer and inner diameters. The results showed that outer and inner diameters followed different deviation trends, confirming that they should be analysed independently. Print speed, layer thickness, and material flow affected dimensional accuracy in different ways depending on the measured diameter. The proposed neural network approach provided a practical means of estimating compensated design diameters within the experimental domain analysed, reducing the need for repeated trial and error adjustments. However, the results should be interpreted within the experimental limits of the study, particularly regarding the use of a single material, a single printer, and a limited validation dataset. Overall, the study provides a practical workflow for improving dimensional accuracy in FFF parts and highlights the importance of diameter-specific compensation strategies.
Gamboa et al. (Sun,) studied this question.