Answers are grounded in this paper and cite their sources.
Three-dimensional assessment and modelling of fractured rock slopes is a challenging task. The reliability of the fracture network definition is of paramount importance for several engineering and geotechnical applications, and so far, different approaches have been proposed to improve the assessment procedure. A thorough knowledge of the actual fracture system is necessary to construct an accurate geometrical model of the rock mass and to determine block size distribution within the rock body. This paper describes the integration of diverse techniques used to define the rock mass fracture pattern, focusing on the most important fracture features, which are joint orientation, spacing, and persistence. A case study in the north of Italy was selected in order to show the potential of an integrated approach where surface and subsurface investigations are coupled. The rock surface was analysed by means of both standard geological mapping and terrestrial laser scanning. Ground penetrating radar surveys were conducted to image and map the discontinuity planes inside the rock mass and to estimate fracture persistence. The results obtained from the various investigation methodologies were employed to construct a model of the rock mass. This approach may lead to a better understanding of fracture network features, usually observed only on the rock surface. A careful analysis of block size distribution in a rock body can be of valuable help in several engineering and risk mitigation applications.
No takes yet. Share an insight, caveat, or question.
Longoni et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: