Answers are grounded in this paper and cite their sources.
Investigates mechanical and tribological performance in aluminium nanocomposites, suggesting enhanced properties.
In the present study, Aluminium (Al)-based hybrid nanocomposites were successfully fabricated via the powder metallurgy route to investigate the synergistic effects of binary hybrid nanofillers on mechanical and tribological performance. Exfoliated molybdenum disulfide (MoS 2 ) and multi-walled carbon nanotubes (MWCNTs) were employed as nanofillers. Bulk molybdenum disulfide was first exfoliated using high-energy planetary ball milling for 30 h to obtain few-layered nanosheets. MoS 2 –MWCNTs hybrid nanofillers were subsequently synthesized through a simple solution-based approach by ultrasonication in acetone for 2 h at varying weight ratios within 1 wt% (MoS 2(X) –MWCNTs (100–X) , where X = 10, 30, 50, 70, and 90 wt%). The prepared hybrid nanofillers were incorporated into pure Al powder via ultrasonication to ensure homogeneous dispersion. The blended powders were compacted and conventionally sintered. The developed nanocomposites were designated as AM 0.1 C 0.9 , AM 0.3 C 0.7 , AM 0.5 C 0.5 , AM 0.7 C 0.3 , and AM 0.9 C 0.1 (A=Al, M=MoS 2 , and C=CNTs). A pure Al sample developed under identical conditions served as a reference. XRD and FESEM analysis confirmed that 30 h of high-energy ball milling effectively exfoliated bulk MoS 2 into thin nanoflakes. HRTEM confirmed a homogeneous and interconnected reinforcement architecture within the Al matrix, promoting effective load transfer, Orowan strengthening, and dislocation strengthening due to thermal mismatch. Among all the nanocomposites, AM 0.5 C 0.5 showed superior performance with the highest relative density (90.75±1.86%), enhanced hardness (442.3±10.68%, 38.34% higher than pure Al), maximum compressive strength (564.24±11.75 MPa, ~2.13 times that of pure Al), and the lowest wear rate of 1.13 mm 3 /m with minimal wear loss. The enhanced properties are attributed to the synergistic reinforcement effect of MoS 2 nanoplatelets and MWCNTs, which improved load transfer, grain refinement, and self-lubricating behavior. These findings demonstrate that optimized hybrid nanofiller ratios significantly enhance the mechanical strength and wear resistance of Al-based nanocomposites, making them potential candidates for advanced structural and tribological applications, particularly in the aerospace and automotive industries.
No takes yet. Share an insight, caveat, or question.
Sahoo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: