Answers are grounded in this paper and cite their sources.
Investigates wear resistance in aluminum composites with varying nanoclay levels, suggesting optimal reinforcement strategies.
Aluminum matrix nanocomposites reinforced with carbon nanotubes have attracted increasing interest for lightweight tribological applications; however, achieving a uniform nanotube dispersion remains a critical challenge. In this study, Al/MWCNT/nanoclay hybrid composites were fabricated via powder metallurgy followed by spark plasma sintering (SPS) to investigate the role of nanoclay as a secondary reinforcement and dispersion aid for MWCNTs. A constant MWCNT content of 1 wt.% was combined with varying nanoclay additions (0.5, 1, and 1.5 wt.%). Microstructural characterization revealed that an optimal nanoclay content of 1 wt.% effectively suppressed MWCNT agglomeration and promoted a more homogeneous reinforcement distribution within the aluminum matrix. The optimized composite exhibited a Vickers hardness of approximately 75.9 HV and achieved about a 2.5-fold improvement in wear resistance compared with pure aluminum. In contrast, excessive nanoclay addition (1.5 wt.%) resulted in reduced hardness and inferior wear performance. Overall, the results demonstrate that controlled nanoclay incorporation provides an effective strategy for enhancing the tribological performance of CNT-reinforced aluminum composites.
No takes yet. Share an insight, caveat, or question.
Jaraemi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: