Answers are grounded in this paper and cite their sources.
Experimental study evaluates the strength of FRP-confined columns in mine environments, indicating effective design improvements.
Maintaining the integrity of large cross‐section space is always the main concern for underground mine operators. An innovative composite tubular column, consisting of the inner ore tailing concrete core and outer container made of the fiber‐reinforced polymer (FRP) composite was developed in the present research. A total of 15 composite columns with a constant inner diameter of 150 mm and a height of 300 mm were tested to investigate the effects of critical parameters (i.e., the concrete strength, the types and thicknesses of FRP composites) of this sustaniable and cost‐effective column. In parallel, nine plain concrete columns without confinement were also tested for comparison. Test results showed that the maximum compressive strength of the plain concrete core is 20.21 MPa at 28 days. Compared to these plain concrete columns, the maximum strength and axial deformation of these composite columns have been enhanced to 1144% and 2429%, respectively. The thicker FRP container is highly recommended if the high strength of the structure is requested, whereas the large rupture strain FRP is believed to be an ideal choice if the large axial deformation of the tubular columns is the main concern.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: