Answers are grounded in this paper and cite their sources.
Shows improved compressive performance and cytocompatibility in bone regeneration, indicating promising scaffold materials.
Polylactic acid (PLA) is an attractive material for bone tissue engineering, yet its slow, acidic degradation, limited hydrophilicity, and modest compressive performance restrict clinical translation. Here, PLA was combined with magnesium hydroxide (Mg(OH) 2 ; 0.5–2 wt.%) and nano‑hydroxyapatite (nHA; 5 wt.%) and then fabricated by fused deposition modeling to buffer degradation, improve wetting, and reinforce mechanics. Physicochemical (contact angle, weight loss in PBS (phosphate buffer solution)), mechanical (compression and tension), and in vitro assays (MG‑63 viability) were performed. Results: Incorporating Mg(OH) 2 and nHA decreased the contact angle from 71.5° (PLA) to 49.7° (PLA2‑5), increased 60‑day weight loss from ∼2% to 15.52% (PLA2‑5), and buffered local acidity. Compressive strength rose from 9.37 MPa (PLA) to 27.55 MPa (PLA0.5‑5), while the modulus reached 281.34 MPa (PLA2‑5). MG‑63 viability remained high (e.g., 98.36% for PLA0.5‑5) with a slight decrease at the highest Mg(OH) 2 content (88.76% for PLA2‑5). Co‑incorporation of Mg(OH) 2 and nHA synergistically enhances hydrophilicity, degradation buffering, and mechanical competence of PLA scaffolds, with PLA0.5‑5 showing the best balance.
No takes yet. Share an insight, caveat, or question.
Darvishi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: