Answers are grounded in this paper and cite their sources.
Experimental study examines friction and wear in polypropylene composites with copper wire reinforcement, highlighting implications for material design.
The friction and wear of polypropylene matrix composites reinforced by unidirectional continuous copper wires are discussed in this work. It was found that friction coefficient displayed by the scratch of PP reinforced by copper wires showed slight decrease with increasing number of wires, where the load had insignificant effect on friction coefficient. The change of wire diameter had slight effect on friction coefficient. The hardness decreased close to the wire due to the change of the cooling rate, where the zone near the copper wire was cooling faster and causing a decrease in polymer hardness. Wear of the tested composites slightly decreased with increasing number of wires. Increase of wire diameter showed insignificant effect on wear which significantly increased with increasing normal load. The wear decrease of the tested composites can be explained on the basis that the presence of wire reinforcement can restrain the deformation of the polymer matrix. Besides, plastic deformation, grooving and smearing of surface can be decreased by the strengthening effect of the reinforcement as well as the retarding action of the copper wire against the motion of the indenter.
No takes yet. Share an insight, caveat, or question.
Eman et al. (2016) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: