Answers are grounded in this paper and cite their sources.
Investigates dynamic response to rockfall impact in bridge piers, suggesting key design considerations.
To investigate the structural dynamic response of pile-column bridge piers in mountainous regions under rockfall impact, this study takes the No.4 double-column pier of Changba Bridge in Nanchuan, Chongqing, as a prototype. Based on similarity theory and differential equation analysis, a scaled model test was designed and conducted. By considering different rockfall impact angles (30°, 45°, 60°) and different impact positions on the pier (top, middle, bottom), the strain response characteristics of the pier concrete and reinforcing steel were systematically analyzed. The results indicate that the peak strain at the impacted location increases significantly with the increase in the rockfall impact angle; when the impact angle increases from 30° to 60°, the peak strain increases by approximately 22.8%. The peak strain decreases as the impact position approaches the bottom of the pier, with the most pronounced strain response observed at the middle position. The strain response of the reinforcing steel follows the same pattern as that of the concrete, albeit with a brief delay. Furthermore, the stirrups exhibit predominantly transverse orthogonal strain, while the longitudinal reinforcing bars exhibit predominantly longitudinal orthogonal strain. It is concluded that the impact angle is a key parameter affecting local damage to the pier, and the middle section of the pier should be regarded as a priority protection zone. This study provides a theoretical basis for the design of bridge piers in mountainous regions against rockfall impact.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: