Answers are grounded in this paper and cite their sources.
Investigates flow control in micro plasma actuator arrays, highlighting performance differences between configurations.
Plasma actuators are promising devices for near-wall flow control; however, conventional actuators often produce jets and forcing regions with excessive wall-normal spread, which reduces near-wall actuation selectivity. In this study, micro plasma actuator arrays with SDBD and pulsed-DC configurations were experimentally characterized to examine jets and forcing patterns confined closer to the wall. Micro actuator arrays consisting of eight integrated elements with sub-millimeter electrodes (0.5 mm exposed width) were fabricated by photolithography. Mean velocity fields were evaluated by conventional particle image velocimetry (PIV), while near-electrode flow structures were examined by single-pixel PIV. In addition, the streamwise body-force distribution was estimated from the high-spatial-resolution velocity fields. The results showed that the micro actuator arrays formed jets confined closer to the wall than the conventional actuators, with repeated re-acceleration along the electrode array. The estimated body-force distribution showed that the SDBD configuration retained a reverse-sign forcing pattern near the wall, whereas the pulsed-DC configuration formed a more concentrated near-wall positive forcing pattern with a weaker reverse-sign region and a lower positive peak location (0.54 mm, compared with 1.38 mm for the SDBD configuration). Under the tested quiescent-air characterization conditions, the pulsed-DC configuration produced a more wall-confined positive estimated-forcing pattern.
No takes yet. Share an insight, caveat, or question.
Matsuno et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: