Answers are grounded in this paper and cite their sources.
Numerical investigation shows improved heat transfer in triangular channels using Cu-MXene nanofluids, indicating potential for energy storage systems.
This study numerically investigates the thermo-hydraulic performance of Cu–MXene/H 2 O hybrid nanofluid flowing through a two-dimensional triangular corrugated channel, a configuration highly relevant to high-performance heat exchangers and thermal energy storage systems in internal flows. Using the standard k–ε turbulence model in ANSYS-FLUENT, flow and heat transfer characteristics were analyzed for Reynolds numbers ranging from 5000 to 10,000. Thermophysical properties for nanoparticle weight concentrations of 0.025% and 0.05% were incorporated based on experimentally validated data at 303 K. Results indicate that increasing nanoparticle concentration significantly enhances thermal performance; improvements in the average Nusselt number of 15.22% and 20.02% were observed for 0.025 wt.% and 0.05 wt.% concentrations, respectively, compared to the base fluid. While the friction factor increased by approximately 14–16% for the 0.05 wt.% concentration due to enhanced viscosity, the performance evaluation criterion remained above unity for all cases, reaching a maximum of 1.18 at Re = 10,000. These findings demonstrate that the dual mechanism of triangular corrugations and hybrid nanoparticles effectively disrupts boundary layers to improve heat transfer, outweighing the associated hydraulic penalties. The integration of Cu + Mxene/H2O hybrid nanofluid volume fractions of 9.18%, 19.02%, 25.075%, along with 0%, 0.025%, and 0.05%, resulted in a notable improvement in the heat transfer coefficient of the hybrid nanofluids.
No takes yet. Share an insight, caveat, or question.
Madhavarao Kulkarni (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: