Answers are grounded in this paper and cite their sources.
• Novel CWlaser-SEM device used to post process AM 316L to improve mechanical properties. • Simultaneous significant improvement in strength, ductility and fatigue life. • Property improvement due to microstructure refinement and surface smoothening. • Lasering reduces microsegregation and dislocation cell size by an order of magnitude. • Fatigue life improvement occurs despite tensile residual stresses on the surface. Post-process laser scanning under high vacuum is proposed as a non-isothermal heat treatment to simultaneously refine the intragranular microstructure near the surface and reduce surface roughness, while preventing oxidation, to enhance the mechanical response of an alloy. This treatment is performed using laser spot sizes and scan speeds that produce higher temperature gradients and faster heating/cooling rates than those encountered during manufacturing. The effectiveness of this approach is demonstrated on laser-based direct energy deposited 316L stainless steel using parameters similar to those used in laser-based powder bed fusion. High vacuum (< 0.1 Pa) lasering is conducted inside a newly integrated continuous-wave laser and scanning electron microscope (CW Laser-SEM). The treatments result in an order-of-magnitude reduction in microsegregation cell sizes (from 2.2 to 0.3 µm) coinciding with 0.3 µm-diameter dense-walled dislocation cell structures, as well as in surface roughness (from 16.6 to 0.9 µm) of LDED 316L. For a parameter set in which the laser penetrates 14 % of total depth (7 % each on the two widest sample surfaces), significant enhancements are obtained in yield strength (31.11 %), ductility (14.2 %) and fatigue limit (25 %). This approach has tremendous potential to alter microstructure and improve mechanical response of additively and conventionally manufactured alloys.
No takes yet. Share an insight, caveat, or question.
Macías et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: