A 2.5-D Angularly Stable Frequency Selective Surface Using Via-Based Structure for 5G EMI Shielding

A novel broadband bandpass frequency-selective surface (FSS) designed for fifth generation (5G) EMI shielding is proposed in this paper. This new design employs the vertical vias into the 2-D periodic arrays, and such a single 2.5-D periodic layer of via-based structure is demonstrated to produce a highly stable angular response up to 60° for both TE and TM polarizations. By cascading two layers of such 2.5-D periodic arrays, the proposed FSS is able to obtain a broad passband as well as the wide out-of-band rejection. Moreover, it has a quite sharp band edge between the passband and the specified stopband. A corresponding equivalent circuit model (ECM) is further developed for better analysis of the operating principle. Finally, a prototype working at the center frequency of around 28 GHz is fabricated and measured. The main novelty of this paper is introducing the 2.5-D concept into designing a wideband FSS, and further reduce the unit size as well as improve the angular stability. Favorable agreement is achieved among the 3-D full-wave simulation, ECM and measurement. All these results demonstrate that the proposed FSS is a good candidate for 5G EMI shielding.