GaN-Based Miniaturized Cyan Light-Emitting Diodes on a Patterned Sapphire Substrate With Improved Fiber Coupling for Very High-Speed Plastic Optical Fiber Communication

We demonstrate the performance of a novel cyan light-emitting diode (LED) on a patterned sapphire (PS) substrate as a light source for plastic optical fiber (POF) communications with the central wavelength at 500 nm. To further enhance the external quantum efficiency (EQE) and output power of this miniaturized high-speed LED, a LED with a PS substrate is adopted. Furthermore, by greatly reducing the number of active <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex Notation="TeX">InₓGa_1 - xN/GaN</tex></formula> multiple quantum wells (MQWs) to four and minimizing the device active area, we can achieve a record-high electrical-to-optical (E–O) bandwidth (as high as 400 MHz) among all the reported high-speed visible LEDs under a very small dc bias current (40 mA). The fiber coupling efficiency has been improved in 4 dB using lens with a 500- <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">μ m</tex></formula> diameter mounted on the LED chip. Thus, the maximum fiber-coupled power was <formula formulatype="inline" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex Notation="TeX">$-$</tex></formula> 2.67 dBm at the bias current of 40 mA. The 1.07-Gb/s data transmissions over a 50-m SI-POF fiber have been successfully demonstrated using this device at the bias current of 40 mA.