Answers are grounded in this paper and cite their sources.
The innovative field of printed sensor with a demand for high accuracy, sensitivity and durability has enabled a wide application area in sensing, healthcare etc. A large-area printed sensor system on a flexible foil substrate emplying p-type organic field-effect transistors (OFETs) is presented. Thereby, the OFET is fabricated through a hybrid manufacturing process, including photolithographically structured source- and drain-electrodes, ink-jet printed organic semiconductor, and spin-coated dielectric. Moreover, a dedicated device model, derived from the variable range hopping model, is developed and integrated together with process related design rules, materials properties and geometric information into a comprehensive process design kit (FH_OPDK). The FH_OPDK is integrated in a commercial electronic design automation tool and is used to design and perform post-layout simulations on logic gates, such as INV, NAND2, and NOR2 as well as circuitry such as ring oscillators and a 4 × 16 digital decoder. Several circuit topologies have been tested and evaluated in a detailed model-hardware correlation analysis. Finally we have optimized logic gates and the decoder in a PMOS only, pseudo CMOS design style. To demonstrate the feasibility of the full sensor system in hardware a 16 × 16 active matrix pressure sensor on a flexible substrate integrated with a 4 × 16 binary decoder was fabricated and tested. We have integrated our flexible hybrid sensor system with a PCB board and a microcontroller to demonstrate the hardware readout platform capable of detecting the weight of objects and visualizing a digital map of applied forces.
No takes yet. Share an insight, caveat, or question.
Gupta et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: