A new wide-band planar balun on a single-layer PCB

A new wide-band microstrip balun implemented on a single-layer printed circuit board (PCB) is presented in this letter. The proposed planar balun consists of a wide-band Wilkinson power divider and a noncoupled-line broad-band 180/spl deg/ phase shifter. To demonstrate the design methodology, one prototype is realized. The new design was simulated and validated by the measurement. Measured results show that 10-dB return loss of the unbalanced port has been achieved across the bandwidth from 1.7 GHz to 3.3 GHz, or 64%. Within the operation band, the measured return losses for both the two balanced ports are better than -10 dB, and the balanced ports isolation is below -1.5 dB. The measured amplitude and phase imbalance between the two balanced ports are within 0.3 dB and /spl plusmn/5/spl deg/, respectively, over the operating frequency band.